Smoked Lens – Includes 2 Electronic Sensors – Blue LED Display – 2-1/16″ 52mm – GlowShift Tinted 7 Series Dual Digital 220 PSI Air Pressure Gauge Kit – For Air Ride Suspension Systems

#ad
#ad
GlowShift Gauges GS-T713_DUAL-SM #ad - Glowshift stands behind all of its products by including free lifetime technical support and a one year limited warranty with every gauge purchase. By utilizing electronic sensors, GlowShift has eliminated the need to run an air hose directly to the back of the gauge, cutting down on your installation time.

This dual air pressure gauge includes two electronic air pressure sensors that work completely independently of each other, valve, and feature 1/8 NPT threads making them easily installed to any tank, read air pressure from 0-220 PSI, or air hose. Free lifetime technical Support & One Year Limited Warranty.

Smoked Lens - Includes 2 Electronic Sensors - Blue LED Display - 2-1/16" 52mm - GlowShift Tinted 7 Series Dual Digital 220 PSI Air Pressure Gauge Kit - For Air Ride Suspension Systems #ad - Two electronic air pressure Sensors with 1/8th NPT Threads. This gauge only features a blue digital readout, but the trim ring matches our Tinted 7 Color Gauge Series assuring all of your vehicle's gauges are a perfect match. Monitoring and adjusting your suspensions air pressure is extremely important since it directly affects the way your vehicle rides, and this dual air pressure gauge will let you know when to add more pressure for road imperfections or release pressure for a custom lowered look.

This dual air pressure gauge also includes a dimming function that allows the gauge to dim up to 30% when connected to your factory headlight switch, for easier night time driving. Two blue digital air pressure Readings from 0 to 220 PSI. Mounting Hardware and Installation Hardware. 2 1/16 inch 52mm black face Gauge with a Magnified Tinted Lens.

More information about GlowShift Gauges GS-T713_DUAL-SM #ad

Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee

#ad
#ad
Utah Pneumatic #ad - Never apply tube joint with additional external loadbending, twist or pulling, otherwise damage or leakage will be occurred. Caution check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch. Please refer to following instruction in connection of tubing.

When you insert the air tubing into the joint, you will have two-step feeling. Section one is locking claw and section two is sealing ring. Must insert tube into section two. Sleeve is used in tubing connection and disconnection. The sleeve is designed as an oval shape, which is covienient in assembly and disassembly.

Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee #ad - However, round sleeve is available to met any special demand the product has limited space for oval sleeve. After connection of tube joint and tubing, always try to pull tubing and ensure its firm connection. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing.

User's Guide 1. The tube fitting is prohibited if water temperature is above 60'C 4.

More information about Utah Pneumatic #ad


Similar products



For Car & Truck - Black Dial - 2-1/16" 52mm - Smoked Lens - Includes Electronic Sensor - GlowShift Tinted 7 Color 260 F Transmission Temperature Gauge Kit

#ad
#ad
GlowShift Gauges GS-T712-SM #ad - The included 1/8th npt transmission temperature sensor is easily installed to your transmissions test port or by replacing your stock sensor. Electronic transmission temperature Sensor with 1/8-27 NPT Male Threads with Installtion and Mounting Hardware. Gauge features this transmission temperature gauge boasts incredible features that include, stepper motor technology, an illuminated red needle, a low profile tinted lens, as well as 7 color LED through dial lighting.

7 solid color settings and two color Cycle Modes with Dimmer Function that Allows the Gauge to Dim 30%. Free lifetime technical Support & One Year Limited Warranty. Lifetime support glowshift stands behind all of its products by including free lifetime technical support and a one year limited warranty with every gauge purchase.

For Car & Truck - Black Dial - 2-1/16" 52mm - Smoked Lens - Includes Electronic Sensor - GlowShift Tinted 7 Color 260 F Transmission Temperature Gauge Kit #ad - Connecting this gauge to your factory headlight switch allows it to dim up to 30% for easier night driving, and with the color memory recall feature you won't need to worry about adjusting the color of your gauge every time you turn your vehicle on. Glowshift's transmission temperature gauge reads your transmission temperature from 80 to 260 degrees Fahrenheit with the included 1/8th NPT electronic temperature sensor.

Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. The included stepper motor gives you the perfect combination of extremely accurate gauge readings with incredibly smooth needle movement.

More information about GlowShift Gauges GS-T712-SM #ad


Similar products



Viair 90005 Tank Port Fittings Kit

#ad
#ad
Viair 90005 #ad - Thread sealant is recommended for use with all brass fittings. Free lifetime technical Support & One Year Limited Warranty. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Electronic transmission temperature Sensor with 1/8-27 NPT Male Threads with Installtion and Mounting Hardware.

Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Viair 5 piece tank port fittings kit for onboard air systems includes two 1/4 inch plugs, compression fitting, drain cock, and 175 PSI safety valve. Kit includes two 1/4 inch plugs, drain cock, compression fitting, and 175 PSI safety valve.

Viair 90005 Tank Port Fittings Kit #ad - All fittings are 1/4 inch NPT. Always use a drain cock and a safety release valve when installing an onboard air system. All brass construction. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. 2 1/16 inch 52mm black face Gauge with a Magnified Tinted Lens.

More information about Viair 90005 #ad


Similar products



1/4" OD x 50' SAE J844 Nylon Air Brake Tubing Suspenion Horn Train Lowrider

#ad
#ad
Power Products C604 #ad - Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. 2 1/16 inch 52mm black face Gauge with a Magnified Tinted Lens. Electronic transmission temperature Sensor with 1/8-27 NPT Male Threads with Installtion and Mounting Hardware. 7 solid color settings and two color Cycle Modes with Dimmer Function that Allows the Gauge to Dim 30%.

1/4" od x 50' sae j844 nylon air brake tubing type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Transmission temperature Reading from 80 to 260 Degrees Fahrenheit.

1/4" OD x 50' SAE J844 Nylon Air Brake Tubing Suspenion Horn Train Lowrider #ad - Kit includes two 1/4 inch plugs, compression fitting, drain cock, and 175 PSI safety valve. All fittings are 1/4 inch NPT. All brass construction. Thread sealant is recommended for use with all brass fittings. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET.

More information about Power Products C604 #ad


Similar products



1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON standard USA pipe thread. Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid.

#ad
#ad
U.S. SOLID USS2-00051 #ad - The direct current coil energizes at 12 volts DC; It doesn't not matter which line is positive and which is negative, the valve will energize identically Voltage range + or - 10%. Only opens while energized. This valve's body is made of solid brass very corrosion resistant material. Warranty-all u. S. Model: uss2-00051.

Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Always use a drain cock and a safety release valve when installing an onboard air system. U. Operational pressure range for water: 0 to 101 pSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.

1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON standard USA pipe thread. Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid. #ad - 1/4" npt port, viton seals, or fuel disel, 12 volt DC, for air, gasoline, water, brass body, oils and other hydrocarbons. Transmission temperature Reading from 80 to 260 Degrees Fahrenheit. Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Viton gasket- viton is a space age material that is very chemically inert.

Commonly used standard pipe thread in U. S. Solid brass.

More information about U.S. SOLID USS2-00051 #ad


Similar products



2-1/16" 52mm - Smoked Lens - Includes Type K Probe - GlowShift Tinted 7 Color 1500 F Pyrometer Exhaust Gas Temperature EGT Gauge Kit - For Diesel Trucks - Black Dial

#ad
#ad
GlowShift Gauges GS-T708_1500-SM #ad - 2 1/16 inch 52mm black face Gauge with a Magnified Tinted Lens. Reads exhaust gas temperature from 0° to 1500° Fahrenheit. Commonly used standard pipe thread in U. S. Solid brass. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. Glowshift's 7 color through dial lighting lets you select from 7 different solid color, along with 2 color cycle modes, letting you match your factory dash lights or add a custom look to the interior of your vehicle.

Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Overview glowshift's tinted 7 color series 1500° pyrometer egt gauge reads from 0 to 1500° Fahrenheit and is essential for any diesel truck that is driving long distances or pulling heavy loads, ensuring your exhaust temperature is not running too hot which result in engine failure.

2-1/16" 52mm - Smoked Lens - Includes Type K Probe - GlowShift Tinted 7 Color 1500 F Pyrometer Exhaust Gas Temperature EGT Gauge Kit - For Diesel Trucks - Black Dial #ad - Contact [email protected] Com. Viton gasket- viton is a space age material that is very chemically inert. All brass construction. Electronic transmission temperature Sensor with 1/8-27 NPT Male Threads with Installtion and Mounting Hardware.

More information about GlowShift Gauges GS-T708_1500-SM #ad


Similar products



Viair 90223 90/120 Pressure Switch with Leads

#ad
#ad
Viair 90223 #ad - Transmission temperature Reading from 80 to 260 Degrees Fahrenheit. The solenoid's magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Commonly used standard pipe thread in U. S. Solid brass. 2 1/16 inch 52mm black face Gauge with a Magnified Tinted Lens. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing.

Viair 90223 90/120 Pressure Switch with Leads #ad - Direct acting and normally closed valve n. C. Do not use nbr gasket for gasoline it will corrode the gasket and can cause serious gasoline leak and accident or fire. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Includes type k thermocouple egt probe with 1/8-27 npt threads, 2' power harness, 6' Sensor Harness with Waterproof Connector, Waterproof Connector & 3' of Braided Steel Cable, Mounting Hardware & Installation Instructions.

7 solid color settings include blue, green, Purple, White, Red, Yellow & Teal with 2 Color Cycle Modes. Free lifetime technical Support & One Year Limited Warranty. Contact [email protected] Com. Thread sealant is recommended for use with all brass fittings.

More information about Viair 90223 #ad


Similar products



2-1/16" 52mm - For Air Ride Suspension Systems - GlowShift Tinted 7 Color 200 PSI Mechanical Air Pressure Gauge - Smoked Lens - Black Dial

#ad
#ad
GlowShift Gauges GS-T713-SM #ad - 7 solid color settings and two color Cycle Modes with Dimmer Function that Allows the Gauge to Dim 30%. 2 1/16 inch 52mm black face Gauge with a Magnified Tinted Lens. Glowshift's air pressure gauge boasts some incredible features that include, 7 color through dial lighting, a low profile magnified tinted lens, and an easy to read illuminated red needle that will sweep 270 for maximum accuracy.

Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Always use a drain cock and a safety release valve when installing an onboard air system. Free lifetime technical Support & One Year Limited Warranty. Glowshift's tinted 7 series 200 psi air Pressure Gauge is perfect for any vehicle that has air brakes or an aftermarket air suspension.

2-1/16" 52mm - For Air Ride Suspension Systems - GlowShift Tinted 7 Color 200 PSI Mechanical Air Pressure Gauge - Smoked Lens - Black Dial #ad - This mechanical air pressure gauge reads from 0 to 200 PSI with the included 1/8th NPT male fitting that is located on the back of the gauge. 30 amp. 2 1/16 inch 52mm black face Gauge with a Magnified Tinted Lens. Air pressure reading from 0 to 200 PSI. Free lifetime technical Support & One Year Limited Warranty.

. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing.

More information about GlowShift Gauges GS-T713-SM #ad


Similar products



Viair 92820 6 Port Manifold with Mounting Holes

#ad
#ad
Viair 92820 #ad - This valve's body is made of solid brass very corrosion resistant material. Warranty-all u. S. As such, kerosine and other organic solvents. Thread sealant is recommended for use with all brass fittings. Weather Proof Sealed Connections. Transmission temperature Reading from 80 to 260 Degrees Fahrenheit. Reads exhaust gas temperature from 0° to 1500° Fahrenheit.

Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Always use a drain cock and a safety release valve when installing an onboard air system. Mechanical gauge with 1/8th NPT Male Thread with Mounting Hardware & Installation Instructions.

Viair 92820 6 Port Manifold with Mounting Holes #ad - Free lifetime technical Support & One Year Limited Warranty. Kit includes two 1/4 inch plugs, drain cock, compression fitting, and 175 PSI safety valve. All fittings are 1/4 inch NPT. Perfect Fit. Electronic transmission temperature Sensor with 1/8-27 NPT Male Threads with Installtion and Mounting Hardware. All brass construction.

More information about Viair 92820 #ad


Similar products



Ulincos Latching Pushbutton Switch U16F2 1NO1NC SPDT ON/Off Black Metal Shell with Blue LED Ring Suitable for 16mm 5/8" Mounting Hole Blue

#ad
#ad
Ulincos U16F2 #ad - Includes type k thermocouple egt probe with 1/8-27 npt threads, 2' power harness, Waterproof Connector & 3' of Braided Steel Cable, 6' Sensor Harness with Waterproof Connector, Mounting Hardware & Installation Instructions.7 solid color settings include blue, White, green, Purple, Red, Yellow & Teal with 2 Color Cycle Modes.

Free lifetime technical Support & One Year Limited Warranty. Reads exhaust gas temperature from 0° to 1500° Fahrenheit. As such, kerosine and other organic solvents. The newer model of u16c2, you don't need to solder the terminals, with a wire connector not included, make fitting very easy. The switch and led are separated, LED can be on all the time or only on when switch is on, depending on how you wire it.

Ulincos Latching Pushbutton Switch U16F2 1NO1NC SPDT ON/Off Black Metal Shell with Blue LED Ring Suitable for 16mm 5/8" Mounting Hole Blue #ad - All brass construction. Sealed Pressure Switch. Direct acting and normally closed valve n. C. Do not use nbr gasket for gasoline it will corrode the gasket and can cause serious gasoline leak and accident or fire. If you intend on using a valve for gasoline, it is commonly used with gasoline, use only VITON gasket.

1/4" npt usa national pipe thread. Viton gasket- viton is a space age material that is very chemically inert.

More information about Ulincos U16F2 #ad


Similar products