Top 10 Akasa USB 3.1 Front Panel – USB Hubs

As an Amazon Associate I earn from qualifying purchases.

1. Akasa

#ad

Akasa AK-ICR-32 USB 3.1 Gen2 Type-C Panel with Dual Gen1 Type-A Ports for 3.25-Inch Front PC Bay

#ad
Akasa #ad - Fits into a 3. 5" pc panel bay. Backwards compatible with usb 3. 1 gen1/ usb 3. 0 and usB 2. 0 Superspeed+ usb 3. 1 gen2 connection. Utilises the new generation of USB 3. 1 gen2 internal front panel connector. Data transfer rate up to 10Gbps.
BrandAkasa #ad
ManufacturerAkasa #ad
Height0.98 Inches
Length4.72 Inches
Width3.94 Inches
Part NumberAK-ICR-32
ModelAK-ICR-32

2. PingPing

#ad

PingPing USB Front Panel Adapter,Vertical USB 3.1 Front Panel Socket Key-A Type-E to USB 3.0 20Pin Header Adapter

#ad
PingPing #ad - Support all motherboard usb3. 0/3. 1 19pin interfaces, which can convert the available USB 3. 0 connectors on the motherboard to USB 3. 1 connectors, so the USB 3. 1 port of the shell can also be provided with USB 3.

1 without the need for a suitable motherboard. Vertical transfer, small size, stable signal, integrated differential signal optimization technology, no interference with other multi-layer circuit boards, strong anti- interference ability, The adapter is the perfect solution to use the USB 3.11 connectors with Type-C or Type-A. Installed on the pci bracket, it can help you easily connect devices with C-type interfaces.

Bundled in usb 3. 1 at speeds up to 10gbps depending on the host-side transfer speed. The type-c reversible design simplifies the connection and allows you to plug in any way without worrying about it being upside-down. No need to install drivers. The interface is usb3. 0 19pin type-e 20pin front panel headerr, the connection is stable. Provides a complete USB 3. 1 port that can be inserted into a USB 3.
BrandPingPing #ad
ManufacturerXCZZYB #ad
Height0.39 Inches
Length3.94 Inches
Width2.36 Inches
Part NumberXCZZYB-013

3. JoyReken

#ad

JoyReken Vertical USB C Header Adapter, USB Front Panel Adapter, USB 3.1 Type-E Key-A to USB 3.0 20Pin Header Converter for Type C Motherboard

#ad
JoyReken #ad - This may result in a power shut down to protect the motherboard and its components. Easy way to access usb-c and support front panel header, doesn't require to have latest motherboard to experience USB-C technology.

However, many usb-c devices can withdraw power up to 100W 20A x 5V. Front panel: usb 3. 1 a-key 20 pin front panel female header / NOTE: Does not convert from 5GB/s to 10GB/s. Motherboard: usb 3. 0 internal 19 pin MB Male Housing Header. Supports all motherboards with USB 3. 0/ 3. 1 19-pin header. Note on usb current over limit issue: the power from the usb 3. 0 header on the motherboard has a power rating at 4. 5w 09a x 5V.
BrandJoyReken #ad
ManufacturerJoyReken #ad
Part NumberJR-UE180
ModelJR-UE180

4. zdyCGTime

#ad

ZdyCGTime USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable for ASUS Motherboard 20cm Black 20p

#ad
zdyCGTime #ad - Usb 3. 1 front panel header to usb 3. 0 front panel header 20Pin Extension Cable 20cm. It is design to be backwards compatible. First motherboard with this is the asus rog maximus ix formula, strix z270i/z270G etc. There are no official release of the specs for the USB 3. 1 header yet as of this writing. Work for asus motherboard. Usb 3. 1 require a different front panel header than USB 3. 0 The usb 3. 1 port interface is using the USB 3. 0 pin set and more. Plz note that only support usb3. 1/usb3. 0 device, it can't work at USB2. 0480mbps.
BrandzdyCGTime #ad
ManufacturerzdyCGTime #ad

5. cablecc

#ad

Cablecc USB 3.1 Front Panel Socket & USB 2.0 to PCI-E Express Card Adapter for Motherboard

#ad
cablecc #ad - Thus, two data lines with 5 Gbps each are available, which are bundled into a USB 3. 1 header with 10 Gbit / s. The converter thus provides a full-fledged USB 3.

1 port. Converter plug-in for the mainboard fits into any USB 3. 0 header bundling in USB 3. 1 with up to 10 GBit / s. The adapter is a converter to convert the available PCI-E of a motherboard into a USB 3. 1 header. Thus the usb 3. 1 port of a housing can also be supplied with USB 3. 1 without a suitable mainboard. The compact adapter can be inserted directly and requires no additional attachments. The adapter is the perfect solution to use the usb 3. 1 connectors with type-c or type-A. Connector1: usb 2. 0 socket connector2: USB 3. 1 front Panel Header.
Brandcablecc #ad
Manufacturercablecc #ad
Part NumberUC-136
ModelUC-136

6. EZDIY-FAB

#ad

EZDIY-FAB USB 3.1 Front Panel Header to USB-C Type-C Female Extension Cable-15inch -45cm Speed up to 10 Gbps

#ad
EZDIY-FAB #ad - Connector1: type-C Female with PCIE bracket. The usb 3. 1 gen2 interface, data transfer speed is two times of USB3. 0’s, up to 10 Gbps. Connector2: usb 3. 1 front panel Type-E Header. Type-c extension port for reaching out latest USB-C device, Experience high speed data transfer.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Part NumberUS-USB3.1 Bracket

7. PENGSHENG

#ad

Vertical USB 3.1 Front Panel Socket Key-A Type-E to USB 3.0 20Pin Header Adapter, PENGSHENG USB Front Panel Adapter

#ad
PENGSHENG #ad - Easy way to access usb-c and support front panel header, doesn't require to have latest motherboard to experience USB-C technology. The type-c reversible design simplifies the connection and allows you to plug in any way without worrying about it being upside-down.

No need to install drivers. However, many usb-c devices can withdraw power up to 100W 20A x 5V. Devices such as iPad Pro and other tablets should not be charged through this port. Note on usb current over limit issue: the power from the usb 3. 0 header on the motherboard has a power rating at 4. 5w 09a x 5V.

Installed on the pci bracket, it can help you easily connect devices with C-type interfaces. The interface is usb3. 0 19pin type-e 20pin front panel header, the connection is stable. This may result in a power shut down to protect the motherboard and its components. Supports all motherboards with usb 3. 0/ 3. 1 19-pin header, which can convert the available USB 3.
BrandPENGSHENG #ad
ManufacturerHENGDS #ad
Height0.39 Inches
Length1.97 Inches
Weight0.03 Pounds
Width0.79 Inches
Part NumberHDS-1303

8. cablecc

#ad

Cablecc USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable 20cm for ASUS Motherboard

#ad
cablecc #ad - Length: 20cm. Usb 3. 1 require a different front panel header than usb 3. 0 . It is design to be backwards compatible will explain later. There are no official release of the specs for the usb 3. 1 header yet as of this writing, but first motherboard with this is the ASUS ROG MAXIMUS IX FORMULA, STRIX Z270I/Z270G etc. The cable only support usb3. 1/usb3. 0 device, it can't work at USB2. 0480mbps. Connector1: usb 3. 0 front panel header Connector2: USB 3. 1 front Panel Header. The usb 3. 1 port interface is using the USB 3. 0 pin set and more.
Brandcablecc #ad
ManufacturerCableCC #ad
Part NumberUSB3120CM
ModelUSB3120CM

9. cablecc

#ad

Cablecc USB 3.1 Front Panel Socket Type-E to USB 3.0 20Pin Header Male Extension Adapter for Motherboard

#ad
cablecc #ad - The small converter is plugged into a USB 3. 0 header that provides two USB 3. 0 lanes. The adapter is the perfect solution to use the USB 3. 1 connectors with Type-C or Type-A. Thus the usb 3. 1 port of a housing can also be supplied with USB 3. 1 without a suitable mainboard. The compact adapter can be inserted directly and requires no additional attachments. The adapter is a converter to convert the available USB 3. 0 header of a motherboard into a USB 3. 1 header.
Brandcablecc #ad
ManufacturerCablecc #ad
Part NumberUC-308

10. LINKUP

#ad

LINKUP, Active Chip USB 3.0 3.1 Gen 2 Internal IDC 20 Pin Motherboard Header to A-Key Type-E 20 Pin Female Converter for Type C Panel Mount Adapter

#ad
LINKUP #ad - Not compatible with iPad Pro and other tablets for charging through this port. Also the communications required by the Power Delivery and Alternate Mode. However, many usb-c devices can withdraw power up to 100W 20A x 5V.

Recommended to be used with linkup - usb-c type panel cable mount motherboard header extension adapter b07thc8ZVF. May not fit itx motherboard in an ITX case due to not having enough space. Not compatible with USB 2. 0 motherboard IDC connector. This adapter is designed to fit all USB 3. 0 20 pin motherboard headers by standard specification. Note on usb current over limit issue: the power from the usb 3.

0 header on the motherboard has a power rating at 4. 5w 09a x 5V. Connector 1 motherboard - uSB 3. 0 internal idc 20 pin MB Male Housing Header. Linkup cares backed by a linkup limited 1-Year Warranty and Complimentary Premium Online Support. Forceful removal of the adapter may cause the header socket to be damaged, linkup is not responsible for such damage. A small number of motherboards do not use standard USB 3.
BrandLINKUP #ad
ManufacturerLINKUP Technology Inc. #ad
Height0.59 Inches
Length4.33 Inches
Weight0.04 Pounds
Width3.15 Inches
Part NumberADP-U3IDC20F-U31AKEY20F