As an Amazon Associate I earn from qualifying purchases.
GOODTAKE #ad - Thanks. 5. If you are going to color 50 pounds of concrete, we recommend adding about 1. 5-2. 5 pounds of pigment cement ; if you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement.
And so on. If still don't understand the mixing ratios of this pigment cement, please contact us. We will serve you wholeheartedly. Evenly mix cement and pigment powder.
Please note: the actual color of red pigment mixed with cement is not very bright. At this point, you can add pigment powder as follows: 1. Attention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 03 to 05 lbs of pigment, add 02 to 04 lbs of pigment, and add 10 lbs of sand; White cement: 1 pack of 10 lbs white cement, and add 10 lbs of sand.
TGK #ad - However, we are not covering issues caused by on- purpose dropping from height, Warranty Card*1. 2▶ heat gun*1, which is a normal phenomenon. Ergonomic comfort grip with auxiliary handle can prevent repetitive strain injuries and other musculoskeletal disorders, remove paint, lighting charcoal, heat shrink tube, electronics repair, provide greater comfort for long hours of use.
5. 2ft ul certified long cable for your safety work around. 2▶ built-in japanese made motor, smooth air blow output with low noise. 2▶ multiple application scenarios - Ideal use for shrink wrapping/PVC, vinyl wrap, candle making, epoxy resin, etc.2
Safe to store and prolong service life. 3▶ the integrated stand can support the heat gun for hands-free working. And the smoke should disappear in less than a minute. 2▶ adjust the red roller to the far left 122℉ and set the switch gear to II to provide maximum airflow 500L/min. What you get 1▶ tgk provide warranty for 1 year since the purchasing date. The red stepless temperature control roller provides rheostat-type heating, the I / II switch on its handle provides air flow control.
GOODTAKE #ad - Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir! The mixing ratios of this pigment cement is 3-5%. 4. Thanks. Characteristics: waterproof, sunscreen, acid resistance, easy to color, alkali resistance, super hiding power.
Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25; 2. Instructions for use: when the cement is in powder form, there is no mortar to mix.
At this point, you can add pigment powder as follows: 1. 5. Specifications: 4oz/8oz/12oz/16oz/20oz. Mix cement and pigment powder with mortar. If you are going to color 50 pounds of concrete, we recommend adding about 1. 5-2.
The Original Color Chips #ad - Great for garages, showrooms, shop floors, basements, laundry room floors, restaurants. Fluorescent floor flakes that glow under BLACK LIGHT! Quickly enhances the look of the surface.
GOODTAKE #ad - Pour the pigment powder into the cement. Specifications: 4oz/8oz/12oz/16oz/20oz. Characteristics: waterproof, easy to color, acid resistance, alkali resistance, sunscreen, super hiding power.
Instructions for use: when the cement is in powder form, there is no mortar to mix. 5. Wear gloves and a mask; 3. Mix cement and pigment powder with mortar. If you are going to color 50 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement.
5-2. 5 pounds of pigment cement ; If you are going to color 200 pounds of concrete, please contact us. We will serve you wholeheartedly. Evenly mix cement and pigment powder. 4. Attention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 02 to 04 lbs of pigment, and add 10 lbs of sand; White cement: 1 pack of 10 lbs white cement, add 0
Tbrand #ad - But also can be used for artificial leather, precast concrete panels, stucco, grout, leather wipe light paste coloring agent. Soluble in hydrochloric acid, acid resistance, but not easy to fade, high temperature resistance, slightly soluble in nitric acid. The main components: iron oxide is inorganic pigment with 8 kind colors, rich in color, the main component of iron oxide, with a good coloring ability.
Low price: this product is a stable and widely used inorganic red pigment with low price, decorative concrete forms, colored stepping stones, You can make colored stone, colored pavers, usually used in building materials such as cement coloring, colored brick, colored walkways, colored tile, with good hiding power, paving bricks and coatings, colored stone veneer, colored cobblestones, and more with these colors.
Very durable under exposure to uv-sunlight, resists fading, with better dispersion and coloring power, economic price, The Perfect Sample Size Due to the strength of the pigment, the main component of iron oxide, high coverage, usually very little color is necessary to achieve the color desired. Coatings are environmentally friendly: the product can be widely used as pigment in high-grade automotive coatings, concrete masonry units, anti-corrosion coatings, mortar, is a better environmental protection coatings, architectural coatings, pigments are used in cast-in-place, overlays, powder coatings, plaster, countertops, and nearly every form of decorative concrete.
GOODTAKE #ad - Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25; 2. Wear gloves and a mask; 3. Specifications: 4oz/8oz/12oz/16oz/20oz. Evenly mix cement and pigment powder.
The mixing ratios of this pigment cement is 3-5%. Characteristics: waterproof, sunscreen, alkali resistance, easy to color, acid resistance, super hiding power. Thanks. If you are going to color 50 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement.
GOODTAKE #ad - At this point, you can add pigment powder as follows: 1. Each bottle of cement pigment comes in a resealable jar. Instructions for use: when the cement is in powder form, there is no mortar to mix. Wear gloves and a mask; 3.
Attention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 02 to 04 lbs of pigment, and add 10 lbs of sand; White cement: 1 pack of 10 lbs white cement, add 03 to 05 lbs of pigment, and add 10 lbs of sand.
Evenly mix cement and pigment powder. Each color net weight is about 4oz/113g. 5. 4. Pour the pigment powder into the cement. Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir! 2 unique colors – 2 colors blue iron oxide | green iron oxide.
YeeBeny #ad - High-quality materials: our resin paddles are made of durable materials that will not bend or break while in use, simply insert the stirring paddle into the resin mixer, And it is reusable. Get a more smooth surface, recommended for 4oz to 17oz of liquid achieving the best mixing possible for small batches of epoxy! Package list: you will get 6 x Resin Stirring Paddles, 2 x Resin Stirring Sticks.
Wide application: epoxy mixer can be used to mix epoxy resin, resin color, but also for mixing thick liquids such as paints, mica powder and pigment powder, powder pigment, jewelry resin casting molds making, jewelry casting, resin supplies, ceramic glazes, craft supplies & materials, etc.
This drill head is easy to use, tighten and use. Better effect: 5-prong mixer paddles with a unique curve design, and mix a more thoroughly liquid mixture, better full mixing, to reduce more bubbles. Strong stirring: compared with traditional stirring methods, the Epoxy Mixing Paddle adopts a spiral 5-blade design, which makes the mixing of epoxy resin easier and more uniform. This resin mixer paddle is ideal for your paint jobs or resin craft projects.
GOODTAKE #ad - 5. Pour the carbon powder into the cement. Wear gloves and a mask; 3. If you are going to color 50 pounds of concrete, we recommend adding about 1. 5-2. 5 pounds of pigment cement ; if you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement.
And so on. If still don't understand the mixing ratios of this pigment cement, please contact us.
4. Specifications: 4oz/8oz/12oz/16oz/20oz. Mix cement and carbon powder with mortar. Thanks. Evenly mix cement and carbon powder. Instructions for use: when the cement is in powder form, there is no mortar to mix. Attention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 02 to 0
1. GOODTAKE
#ad4 oz, GOODTAKE Red Pigment Cement Pastel Tile Paint DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Mortar Grout Red
#adAnd so on. If still don't understand the mixing ratios of this pigment cement, please contact us. We will serve you wholeheartedly. Evenly mix cement and pigment powder.
More information #ad
Pour the pigment powder into the cement. Wear gloves and a mask; 3. 4. Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir! The mixing ratios of this pigment cement is 3-5%. Please note: the actual color of red pigment mixed with cement is not very bright. At this point, you can add pigment powder as follows: 1. Attention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 03 to 05 lbs of pigment, add 02 to 04 lbs of pigment, and add 10 lbs of sand; White cement: 1 pack of 10 lbs white cement, and add 10 lbs of sand.
| Brand | GOODTAKE #ad |
| Manufacturer | GOODTAKE #ad |
More information #ad
2. TGK
#adTGK® 1800W Heavy Duty Hot Air Gun Kit 122℉~1202℉ Dual Temperature Settings with 6 Nozzle Attachments Overload Protection for Crafts, Epoxy Resin, Heat Gun, Paint Removing, Shrink Wrapping/Tubing
#ad5. 2ft ul certified long cable for your safety work around. 2▶ built-in japanese made motor, smooth air blow output with low noise. 2▶ multiple application scenarios - Ideal use for shrink wrapping/PVC, vinyl wrap, candle making, epoxy resin, etc.2
More information #ad
2▶ unlike other dual temperature heat guns, 250l/min; ii: 122℉-1202℉, 500L/Min, 6 gears in total, you can choose the gear you need, and it is more convenient to adjust the TEMP. Safe to store and prolong service life. 3▶ the integrated stand can support the heat gun for hands-free working. And the smoke should disappear in less than a minute. 2▶ adjust the red roller to the far left 122℉ and set the switch gear to II to provide maximum airflow 500L/min. What you get 1▶ tgk provide warranty for 1 year since the purchasing date. The red stepless temperature control roller provides rheostat-type heating, the I / II switch on its handle provides air flow control.
| Brand | TGK #ad |
| Manufacturer | TGK #ad |
| Height | 2.36 Inches |
| Length | 8.66 Inches |
| Weight | 1.44 Pounds |
| Width | 7.09 Inches |
| Part Number | HG5520-US |
More information #ad
3. GOODTAKE
#ad4 oz, GOODTAKE Blue Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout Blue
#adCalculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25; 2. Instructions for use: when the cement is in powder form, there is no mortar to mix.
More information #ad
Wear gloves and a mask; 3. Attention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 02 to 04 lbs of pigment, and add 10 lbs of sand; White cement: 1 pack of 10 lbs white cement, add 03 to 05 lbs of pigment, and add 10 lbs of sand. At this point, you can add pigment powder as follows: 1. 5. Specifications: 4oz/8oz/12oz/16oz/20oz. Mix cement and pigment powder with mortar. If you are going to color 50 pounds of concrete, we recommend adding about 1. 5-2.
| Brand | GOODTAKE #ad |
| Manufacturer | GOODTAKE #ad |
| Weight | 0.25 Pounds |
More information #ad
4. The Original Color Chips
#adThe Original Color Chips Fluorescent Decorative Floor Coating Flakes, 1/4", Black Light Sensitive Neon Chips, per lb Neon Orange
#adMore information #ad
For use on interior and exterior surfaces. Combine with other colors of The Original Color Chips decorative flakes for a customized look.| Brand | The Original Color Chips #ad |
| Manufacturer | The Original Color Chips #ad |
| Weight | 2 Pounds |
| Part Number | OCC201 |
More information #ad
5. GOODTAKE
#ad4 oz, GOODTAKE Wine Red Pigment Cement Pastel Tile Paint DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Mortar Grout Wine Red
#adInstructions for use: when the cement is in powder form, there is no mortar to mix. 5. Wear gloves and a mask; 3. Mix cement and pigment powder with mortar. If you are going to color 50 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement.
More information #ad
And so on. If still don't understand the mixing ratios of this pigment cement, we recommend adding about 1. 5-2. 5 pounds of pigment cement ; If you are going to color 200 pounds of concrete, please contact us. We will serve you wholeheartedly. Evenly mix cement and pigment powder. 4. Attention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 02 to 04 lbs of pigment, and add 10 lbs of sand; White cement: 1 pack of 10 lbs white cement, add 0
| Brand | GOODTAKE #ad |
| Manufacturer | GOODTAKE #ad |
More information #ad
6. Tbrand
#adIron Oxide Pigment, Green Powder Color Pigment for Concrete, Mortar, Plaster, Pigment 0.22lb, Green, Colorant, Grout, Cement
#adLow price: this product is a stable and widely used inorganic red pigment with low price, decorative concrete forms, colored stepping stones, You can make colored stone, colored pavers, usually used in building materials such as cement coloring, colored brick, colored walkways, colored tile, with good hiding power, paving bricks and coatings, colored stone veneer, colored cobblestones, and more with these colors.
More information #ad
Stable chemical properties: iron oxide as an inorganic composite powder, insoluble in water. Strong coloring power, alkali resistance, color is not bright enough, sulfuric acid, chemical stability, with durability. With dispersion & coverage: iron oxide is inorganic pigment, wide range of applications. Very durable under exposure to uv-sunlight, resists fading, with better dispersion and coloring power, economic price, The Perfect Sample Size Due to the strength of the pigment, the main component of iron oxide, high coverage, usually very little color is necessary to achieve the color desired. Coatings are environmentally friendly: the product can be widely used as pigment in high-grade automotive coatings, concrete masonry units, anti-corrosion coatings, mortar, is a better environmental protection coatings, architectural coatings, pigments are used in cast-in-place, overlays, powder coatings, plaster, countertops, and nearly every form of decorative concrete.
| Brand | Tbrand #ad |
| Manufacturer | Tbrand #ad |
| Part Number | Ioxide |
More information #ad
7. GOODTAKE
#adGOODTAKE Yellow Pigment Cement Pastel Tile Paint DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Mortar Grout 8 oz, Yellow
#adThe mixing ratios of this pigment cement is 3-5%. Characteristics: waterproof, sunscreen, alkali resistance, easy to color, acid resistance, super hiding power. Thanks. If you are going to color 50 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement.
More information #ad
And so on. If still don't understand the mixing ratios of this pigment cement, we recommend adding about 1. 5-2. 5 pounds of pigment cement ; If you are going to color 200 pounds of concrete, please contact us. We will serve you wholeheartedly. Pour the pigment powder into the cement. Attention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 03 to 05 lbs of pigment, add 02 to 0| Brand | GOODTAKE #ad |
| Manufacturer | GOODTAKE #ad |
| Height | 7.87 Inches |
| Length | 5.91 Inches |
| Weight | 0.5 Pounds |
| Width | 3.15 Inches |
| Part Number | Color powder-F3 |
| Model | Color powder-F3 |
| Warranty | 60 |
More information #ad
8. GOODTAKE
#ad4 oz Each Bottle 2 Colors, 4 oz/Color, GOODTAKE 2 Colors Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout
#adAttention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 02 to 04 lbs of pigment, and add 10 lbs of sand; White cement: 1 pack of 10 lbs white cement, add 03 to 05 lbs of pigment, and add 10 lbs of sand.
More information #ad
Mix cement and pigment powder with mortar. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25; 2. Characteristics: waterproof, sunscreen, alkali resistance, easy to color, acid resistance, super hiding power. Evenly mix cement and pigment powder. Each color net weight is about 4oz/113g. 5. 4. Pour the pigment powder into the cement. Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir! 2 unique colors – 2 colors blue iron oxide | green iron oxide.
| Brand | GOODTAKE #ad |
| Manufacturer | GOODTAKE #ad |
| Weight | 0.25 Pounds |
More information #ad
9. YeeBeny
#adPaint Mixer for Drill6 paddles and 2 sticks）, Helix Mixer for Resin, Silicone Gallon Mixing Tools, 6 Reusable Multipurpose Bidirectional Paint Stirrer, YeeBeny 6 Pcs Epoxy Mixer Attachment for Drill
#adWide application: epoxy mixer can be used to mix epoxy resin, resin color, but also for mixing thick liquids such as paints, mica powder and pigment powder, powder pigment, jewelry resin casting molds making, jewelry casting, resin supplies, ceramic glazes, craft supplies & materials, etc.
More information #ad
And meet the needs for resin art DIY tumblers lover, colorants. This drill head is easy to use, tighten and use. Better effect: 5-prong mixer paddles with a unique curve design, and mix a more thoroughly liquid mixture, better full mixing, to reduce more bubbles. Strong stirring: compared with traditional stirring methods, the Epoxy Mixing Paddle adopts a spiral 5-blade design, which makes the mixing of epoxy resin easier and more uniform. This resin mixer paddle is ideal for your paint jobs or resin craft projects.
| Brand | YeeBeny #ad |
| Manufacturer | YeeBeny #ad |
| Part Number | 1 |
More information #ad
10. GOODTAKE
#adGOODTAKE Green Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout Green, 4 oz
#adAnd so on. If still don't understand the mixing ratios of this pigment cement, please contact us.
More information #ad
We will serve you wholeheartedly. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25; 2. Characteristics: waterproof, acid resistance, easy to color, alkali resistance, sunscreen, super hiding power.44. Specifications: 4oz/8oz/12oz/16oz/20oz. Mix cement and carbon powder with mortar. Thanks. Evenly mix cement and carbon powder. Instructions for use: when the cement is in powder form, there is no mortar to mix. Attention method: ordinary gray cement: 1 pack of 10 lbs gray cement, add 02 to 0
| Brand | GOODTAKE #ad |
| Manufacturer | GOODTAKE #ad |
More information #ad
