As an Amazon Associate I earn from qualifying purchases.
1. SilverStone Technology #ad
SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans in Black SST-CPF04-USA Newest Version #adSilverStone Technology #ad
- Included 3m adhesive to apply anywhere within your case. 2200μf capacitor provides stable voltage. Pwm 4pin header x 8, compatible with 3pin cable Speed control function is unavailable for 3 pin fans.
Attached 3 pin fans will run at maximum RPM. 1-to-8 pwm connectors. Compact size at only 54mm w x 19mm H x 40mm D. Support speed detection for accurately controlling fans.
2. DEEP COOL #ad
DEEPCOOL FH-10 Integrated Fan Hub, Occupying only One 4-pin Motherboard Header, Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM #adDEEP COOL #ad
- Capable of connecting to 10 PC fans simultaneously for cooling the computer system. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. Only speed of Fan 1 can be identified by the system.
Velcro and screw mountings applicable for the tower interiors. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time. Powered by a stable sata connection to the system PSU for up to 10 fans. That is, all pwm fans will run at the same DUTY RATIO. They will run at FULL SPEED.
|Brand||DEEP COOL #ad|
|Manufacturer||DEEP COOL #ad|
3. Noctua #ad
Noctua NA-FC1, 4-Pin PWM Fan Controller Black #adNoctua #ad
- No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors. Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctua’s industrialPPC series.
6-year manufacturer’s warranty. Compact, highly flexible controller for 4-pin PWM fans. Includes a 3-way splitter cable for controlling up to 3 fans simultaneously.
4. Thermaltake #ad
Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1 #adThermaltake #ad
- Included ties/velcro for easy placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place. Supports 10 4-pin independent fans :capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis.
Blue led power Indicator. 1 year Warranty. Direct sata power input: powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use.
|Manufacturer||Thermaltake USA Direct #ad|
|Warranty||1 year warranty|
5. SUPERPLUS #ad
Chassis Fan and CPU Fan 10 Way 12V 3/4 Pin PWM Fan Hub Controller with PMMA case and Magnetic Standoff Power from SATA Power #adSUPERPLUS #ad
- Interface are conventional PWM fan interface. Magnetic standoff design for easily fixing the hub in the chassis. Designed for 12v 3/4 pin fan, support simultaneous starting of 10 channel 4Pin fans.
The white 4pin connector is the dedicated interface only for CPU fan, these black. Pwm interface is connected to CPU FAN interface on motherboard by PWM cable.
6. Electop #ad
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller #adElectop #ad
- You can connect to the CPU fan lead on the system board or the chassis fan lead. For both 4-pin and 3-pin fans. If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, you will have 10 fans at 50%.
Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Please note 4pin fan speed can be adjusted by temperature control. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
Red is expected to be a pass through for the cpu fan. So, then the speed is regulated by the speed for the "source" fan. In the hub interfaces, the red cpu interface is the cpu fan dedicated interface with speed detection function. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place.
Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. The ten fans will spin at the same speed, that designated by the system for that fan. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
7. Timack #ad
Timack Chassis Fan and CPU Fan 10 Way 12V 3/4 Pin PWM Fan Hub Controller with PMMA case and Magnetic Standoff Power from SATA Power #adTimack #ad
- Compatible with all 12v CPU or system fans with 4 pin or 3 pin connector. 3. A professional Manufacturer of PC Peripherals. 2. Magnetic standoff design for easily fixing the hub in the chassis. 1.
8. DEEP COOL #ad
3 Fan Pack, 5V 3-Pin Motherboard Connector, DEEP COOL MF120 GT A-RGB X-Frame, 6-Port RGB hub and Wire Controller, Included 4-Port PWM Fan Hub #adDEEP COOL #ad
- 3-pin +5v-d-g motherboard rgB connector for direct software control over addressable LEDs. Wide range precision pwm control from 500-1800 RPM allows great cooling performance and quiet low-noise operation. Dual-layer fan blades provide improve both airflow and static pressure for high cooling performance.
Included wire controller provides an easy one touch lighting control with preset effects for quick setup. 20 addressable rgb leds shine across a unique X-Frame design for stunning visual effects on both push and pull setups.
|Brand||DEEP COOL #ad|
|Part Number||MF120 GT|
9. N/D #ad
Cooler Master 1 to 10 4PIN SATA PWM hub, Strong Magnet adsorption is not Easy to Fall Off 1 to 10 PWM HUB, Chassis Fan Cable hub Adapter #adN/D #ad
- 10 sets of pwm fan interface: up to 10 sets of PWM fans can be installed at the same time, convenient installation method, making the installation more efficient.
Sata power line direct output: cooler master 1to10PWM hub adopts Satan power direct output, which is more concise, more efficient and more stable. Small and exquisite size, save more space, save space: small and exquisite shape, make the internal wires of your case more tidy.
Effective cable management: coolermaster 1to10PWM hub has 5 sets of fan jacks on the left and right sides, which is convenient for installation and creates a neat and neat computer space. Powerful magnetic design: coolermaster1to10PWM hub adopts super magnetic design, which can be adsorbed on the metal surface of the chassis and can be placed at will.
10. BUYMINERS.CA #ad
Chassis Fan Hub CPU Cooling 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller Efficient Chassis Adhesive Computer Cooling System Dedicated Supply from PSU to Link Multiple Points #adBUYMINERS.CA #ad
- Manages multiple fans - if your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand. The 12v fan controller accurately controls 4-pin fan speed from a single case input. Cooling when you need it - quiet when you don't.
Easy to install - just plug the sata fan controller into the motherboard and connect to the PSU. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps.
Money back guarantee - all of our products are backed by a manufacturer's warranty, and we will go the extra mile to make things right. Take care during installation to avoid bending the pins and capacitor.
No frills, all function - strong wire connections and clean sleeving are part of our simple, cost effective design. The pwm fan hub then matches the power level for the other ports. If you are unhappy for any reason, contact us for a full refund. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis.