Top 8 Arduino IR Sensor – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. OSOYOO

#ad

OSOYOO 10PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot

#ad
OSOYOO #ad - It has red power indicator. Ir infrared obstacle avoidance sensor Module can be widely used in robot obstacle avoidance, line count, obstacle avoidance car, and black and white line tracking and so on.

The module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted. Can be used for 3-5v dc power supply modules. The output port out sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay. It has a pair of infrared transmitting and receiving tube, when detecting direction meet with obstacles reflecting surface, green indicator will light up, reflected infrared receiving tube, tube infrared emit a certain frequency, after the comparator circuit processing, at the same time signal output interface to output digital signal a low level signal.
BrandOSOYOO #ad
ManufacturerShenzhen Vership Co. LTD #ad
Height1 Inches
Length5.3 Inches
Width3.2 Inches
Part Number12
ModelLYSB01I57HIJ0-ELECTRNCS

2. Gikfun

#ad

Gikfun Infrared Diode Led IR Emission and Receiver for Arduino Pack of 10 Pairs EK8460

#ad
Gikfun #ad - 10pcs vs1838b infrared receiver and 10pcs 5mm 940nm IR infrared Emission Tube LED Lamp. Suitable for infrared products such as electronic toy remote control, infrared temperature measurement, infrared camera, etc. The ir receiver is a small design with a built-in dedicated IC that is highly resistant to interference and can withstand environmental interference. The infrared diode's pin is not easy to be oxidized, it is easy to be tinned, and the solderability is good;. Long service life, no red storm, high reliability.
BrandGikfun #ad
ManufacturerEsooho #ad
Part Number4328462662
Model4328462662

3. Aceirmc

#ad

Aceirmc 10pcs IR Infrared Obstacle Avoidance Sensor for Arduino Smart Car Robot IR Transmitting and Receiving Tube Photoelectric Switch

#ad
Aceirmc #ad - The sensor module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted. Can be used for 3-5v dc power supply modules. It has red power indicator.

It has a pair of infrared transmitting and receiving tube, when detecting direction meet with obstacles reflecting surface, reflected infrared receiving tube, tube infrared emit a certain frequency, green indicator will light up, after the comparator circuit processing, at the same time signal output interface to output digital signal a low level signal. The output port out sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay. Ir infrared obstacle avoidance sensor Module can be widely used in robot obstacle avoidance, line count, obstacle avoidance car, and black and white line tracking and so on.
BrandAceirmc #ad
ManufacturerAceirmc #ad
Part Number16282

4. ELEGOO

#ad

ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA2560 Nano

#ad
ELEGOO #ad - 100% compatible with arduino official IDE, Raspberry Pi and STM32. Add useful modules like gy-521 accelerometer module, heartbeat sensor, DS1307 real time clock module etc.

Removed useless modules like light cup and mercury module, two of the hall sensors, lcd1602 screen, one of the dual-color sensor. There are tutorials in the CD that comes with. Upgraded tutorial only for r3, nano in cd, listing paper, mega2560 r3, resistors pack only from Elegoo Team. If you prefer download the tutorials online from the official website. If the user has no experience, it would be better to have someone lead and teach them while studying. Note: to use elegoo starter kits requires basic electronic knowledge. Updated from the old version others: Received great ideas from our customers and adopted in this upgraded kit.
BrandELEGOO #ad
ManufacturerELEGOO #ad
Height1.73 Inches
Length10.63 Inches
Width7.09 Inches
Part NumberEL-KIT-011
ModelCA-EL-KIT-011
Warrantyhalf year

5. DZS Elec

#ad

DZS Elec 6PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Raspberry Pi Smart Car Robot

#ad
DZS Elec #ad - An be used for 3-5v dc power supply modules. It has red power indicator. Use for robot obstacle avoidance, obstacle detection, electricity meter pulse data sampling, shredder paper detection, obstacle avoidance car, Fax machine, Black and white line detection.

Obstacles are detected by a pair of infrared emitting and receiving tubes. The transmitter tube emits infrared ray, and the green indicator light will be on when the detection direction encounters obstacles, and the signal output interface will output digital signals. Size: 32x14mm/1. 26x055inches. Package Includes:6PCS. Detection distance is 2 ~ 30 cm, 35 degree Angle, distance can be adjusted through the detection of potential.
BrandDZS Elec #ad
ManufacturerDZS Elec #ad
Part NumberIRIASM-IR-6

6. FTCBlock

#ad

FTCBlock 10PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot

#ad
FTCBlock #ad - It has red power indicator. Can be used for 3-5v dc power supply modules. It has a pair of infrared transmitting and receiving tube, reflected infrared receiving tube, green indicator will light up, when detecting direction meet with obstacles reflecting surface, after the comparator circuit processing, tube infrared emit a certain frequency, at the same time signal output interface to output digital signal a low level signal.

Ir infrared obstacle avoidance sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on. The module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted. The output port out sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay.
BrandFTCBlock #ad
ManufacturerSouthern Tech #ad
Part NumberIR

7. DAOKI

#ad

C.J. Shop DAOKI IR Infrared Wireless Remote Control Kits Sensor Board 38KHZ for Arduino AVR PIC

#ad
DAOKI #ad - You can decode the remote control signal through Arduino programming. Its transmit distances up to 8 meters. Ir receiver module can receive standard 38KHz modulation remote control signal. Ideal for handling a variety of equipment indoors. You can design a variety of remote control robots and interactive works. Arduino mini infrared wireless remote control kit consists of ultra-thin infrared remote control and 38KHz infrared receiver module. This mini slim infrared remote control with 20 function keys.
BrandDAOKI #ad
ManufacturerDAOKI #ad
Part NumberBG-US-914005
ModelBG-US-914005

8. YWBL-WH

#ad

Infrared Tracking Sensor Module 1-Channel Infrared Reflection Tracking Sensor Module Obstacle Avoidance Smart Car Black/White Line Detection 3 Pcs

#ad
YWBL-WH #ad - Wide application-the infrared tracking sensor module is widely used for electricity meter pulse data sampling, fax machine paper detection, obstacle detection, black and white line detection.

Tcrt5000 infrared reflection sensor-the infrared tracking sensor module uses TCRT5000 infrared reflection sensor whose infrared emitting diodes are constantly emitting infrared rays. For automation machinery devices-the infrared tracking sensor module provides a versatile infrared detection system solutions for automation machinery devices. Not reflecting back-when the infrared ray emitted is not reflected back or intensity is not high enough, the infrared receiving tube is in the off state and module outputs low level, while indicating diode is off.

Within detecting range-when object is in detecting range, infrared ray will be reflected back with high intensity, the module outputs high level and indicating diode is on.
BrandYWBL-WH #ad
ManufacturerYWBL-WH #ad
Height2.36 Inches
Length3.15 Inches
Weight0.02 Pounds
Width2.76 Inches
Part NumberYWBL-WH4ukgqpvz1b