As an Amazon Associate I earn from qualifying purchases.
Luckkyme #ad - This 4 channels bi-directional logic level converter is a small device that safely steps down 5V signals to 3. 3v and steps up 3. 3v to 5v at the same time. Small module size: 1. 3cm x 1. 5cm/051"x059". Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.
MELIFE #ad - Widely used in the communication between 5v scm and 3. 3v device, 3. 3v scm and 5V device. 8 digit bi-directional 3. 3v-5v/5v-3. 3v logic level converter board. Serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect.
GeeekPi #ad - It can also apply in the level conversion between MCU and SD card, MCU and iic/spi serial port devices. Widely used in the communication between 5v scm and 3. 3v device, 3. 3v scm and 5V device. 8 digit bi-directional 3.
SparkFun #ad - Safely steps down 5v signals to 3. 3v and steps up 3. 3v to 5v at the same time. The level converter is very easy to use. Color: Red.
Teyleten Robot #ad - Oe active high enable IO recommended by a low voltage side of the IO port. Scm and iic, spi serial device level converter. Compatible and other communications support. Mcu and sd card communication level conversion.
NOYITO #ad - Serial communication interface compatible with UART/IIC/SPI port easy to connect. Br>. Oe active high enable io recommended by a low voltage side of the IO port.
DORHEA #ad - High-speed shifter, tie the oe pin directly up to 3. 3v to wORK. The level converter provide serial interface+ is very easy to use. It can also apply in the level conversion between MCU and SD card, MCU and iic/spi serial port devices.
Vcca side voltage range: 1. 2v-3. 6v; vccb side voltage range: 1. 65v-5. 5v; 3. 3v going to va; 5V going to VB; 3. 3v going to 0e, oe active high enable IO recommended by a low voltage side of the IO port.
Txs0108e operate in both open-drain and push-pull modes, with max data throughput of about 2Mbps open-drain and 60Mbps push-pull for 3v3 to 5v translation, serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect. Widely used in the communication between 5v scm and 3. 3v device, 3. 3v scm and 5V device.
waveshare #ad - 3. 3v 5v input. For Arduino. 8 channels bidirectional voltage translation. No direction control required. Translate between Ax and Bx automatically.
1. Luckkyme
#adLuckkyme 10PCS 4 Channels IIC I2C Logic Level Converter Bi-Directional Shifter Module 3.3V to 5V for Arduino
#adMore information #ad
Compatible with breadboard, can be directly use in breadboard. Logic level shifter Bi-Directional with 4 channels between high logic voltage and low logic voltage.| Brand | Luckkyme #ad |
| Manufacturer | Luckkyme #ad |
| Part Number | 021 |
| Model | 8541586311 |
More information #ad
2. MELIFE
#adMELIFE 4Pcs TXS0108E 8 Channel Logic Level Converter Bi-Directional High Speed Full Duplex 8 Way Shifter 5V to 3.3V for Arduino Raspberry Pi
#adMore information #ad
Vcca side voltage range: 1. 2v-3. 6v; vccb side voltage range: 1. 65v-5. 5v. It can also apply in the level conversion between MCU and SD card, MCU and iic/spi serial port devices. It can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage.| Brand | MELIFE #ad |
| Manufacturer | MELIFE #ad |
| Part Number | M15526 |
More information #ad
3. GeeekPi
#adGeeekPi 6Pack TXS0108E 8 Channel Logic Level Converter Bi-Directional High Speed Full Duplex Shifter 3.3V 5V for Arduino Raspberry Pi
#adMore information #ad
3v-5v/5v-3. 3v logic level converter board; It can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage. Vcca side voltage range: 1. 2v-3. 6v; vccb side voltage range: 1. 65v-5. 5v. Serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | D-0010 |
| Model | D-0010 |
More information #ad
4. SparkFun
#adLogic Level Converter Bi-Directional
#adMore information #ad
The board needs to be powered from the two voltages sources high voltage and low voltage that your system is using. This level converter also works with 2. 8v and 1. 8v devices.| Brand | SparkFun #ad |
| Manufacturer | SparkFun #ad |
| Height | 0.2 Inches |
| Length | 2.95 Inches |
| Weight | 0.01 Pounds |
| Width | 4.72 Inches |
| Part Number | BOB-12009 |
| Model | BOB-12009 |
More information #ad
5. Teyleten Robot
#adTeyleten Robot TXS0108E 8 Channel Logic Level Converter Module Bi-Directional High Speed Full Duplex Shifter 1.2V 1.8V 3.3V 5V for Arduino Raspberry Pi 5pcs
#adMore information #ad
| Brand | Teyleten Robot #ad |
| Manufacturer | Teyleten Robot #ad |
More information #ad
6. NOYITO
#adNOYITO TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter 3.3V 5V Bidirectional High Speed Full Duplex Pack of 2
#adMore information #ad
Br>. Provide two-way communication capabilities. Br>. Widely used in the mcu and sd card, mcu and serial devices, MCU and 5V/3V module communiction. Br>. Provide 3. 3-5v, 1. 8-3. 3v and other common level conversion capability. Br>.| Brand | NOYITO #ad |
| Manufacturer | NOYITO #ad |
| Part Number | 8541673166 |
| Model | 8541673166 |
More information #ad
7. DORHEA
#adDORHEA 10PCS TXS0108E 8 Channel Level Conversion Module High Speed Full Duplex 8 Way Bi-Directional Converter 8-Bit Logic Level Module Shifter 3.3V 5V Compatible with Ardu ino Raspberry Pi
#adVcca side voltage range: 1. 2v-3. 6v; vccb side voltage range: 1. 65v-5. 5v; 3. 3v going to va; 5V going to VB; 3. 3v going to 0e, oe active high enable IO recommended by a low voltage side of the IO port.
More information #ad
8 digit bi-directional 3. 3v-5v/5v-3. 3v logic level converter board, it can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage. Txs0108e operate in both open-drain and push-pull modes, with max data throughput of about 2Mbps open-drain and 60Mbps push-pull for 3v3 to 5v translation, serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect. Widely used in the communication between 5v scm and 3. 3v device, 3. 3v scm and 5V device.
| Brand | DORHEA #ad |
| Manufacturer | DORHEA #ad |
| Part Number | 14625-1 |
More information #ad
8. ACROBOTIC
#adACROBOTIC 8-Pack 3.3V~5V 4-Channel Logic Level Converter Bi-Directional Shifter Module for Arduino ESP8266 Raspberry Pi
#adACROBOTIC #ad - Easy-to-use: supply power from the two voltage sources high voltage and low voltage and connect each data line to one of the channels e. G. Tx to channel 1 and RX to channel 2. Convert logic levels from/to bi-directional 3.More information #ad
3vdc and 5vdc for digital communication between devices. Perfect for i2c, esp8266, raspberry pi, serial UART, or spi communication between arduino, ESP32 development boards. Use up to 4 independent channels per converter board 8-pack included.| Brand | ACROBOTIC #ad |
| Manufacturer | ACROBOTIC Industries #ad |
| Part Number | ACR-00068 |
| Model | ACR-00068 |
More information #ad
9. waveshare
#adWaveshare 3.3V 5V 8 Channel Logic Level Converter Convert TTL Bidirectional Mutual Convert
#adMore information #ad
| Brand | waveshare #ad |
| Manufacturer | Waveshare #ad |
| Height | 3.54 Inches |
| Length | 7.09 Inches |
| Weight | 0.02 Pounds |
| Width | 3.94 Inches |
| Part Number | Logic Level Converter |
| Model | Logic Level Converter |
More information #ad
